We are proud to introduce the 2016 model of our 60mm clincher. We have been working on the design for years, running CFD analysis, making physical prototypes, and putting in thousands of miles of on the road testing. With the new models we have wheeset that is more aero, lighter, better handling in crosswinds, and stronger than wheelsets costing twice as much.
The 60mm clincher is the depth that 95% of racers would use for 95% of their races. Any time the speeds are higher, and aerodynamics becomes more of a concern, the 60mm gives a distinct advantage. Flat to rolling road races, crits, time trials, and tris; if you are looking for a combination of good crosswind handling and very good aerodynamics, the 60mm is a perfect option.
The new 60mm rims are designed around 25mm tires to give the best handling, lower rolling resistance, and improved feel due to more air volume and the ability to run lower PSI.
Rim depth - 60mm
Rim width - 27mm
Inner width - 19mm
Rim weight - 530 grams
We have been working on our new tubeless rim bed profile for years, delivering a rim that can safely run tubeless tires as well as well as normal tube and tire. To read more about the Boyd tubeless difference, click here: (link coming)
Adding the Tubeless Kit: The tubeless kit above will include our new (blue) tubeless tape and tubeless valves pre-installed on the wheels! We will install two layers of the tubeless tape in the exact width you need for your wheels. We will also include and install two of our tubeless valves in the exact length needed for your wheels. Take the guess work out of converting to tubeless and let us do it for you.
Note: you will still need a tubeless specific tire and sealant to run the wheels as a tubeless system.
TEXTURED BRAKE TRACK
Braking is not that important. . . until it is! One of the things people have fear in regards to carbon is the braking performance, especially in wet conditions. Carbon braking performance has always lagged behind aluminum in terms of pure stopping power. With the new brake track on these rims, featuring a slight textured surface, braking is better than ever. Feel confident that no matter what speed, terrain, or weather condition when you need to come to a stop you will.
HIGH TEMPERATURE RESINS
The resins on the new carbon wheels can take the mountains! Countless hours of testing and resin formulas have gone into making a rim that can be ridden in any terrain. . .with any carbon specific brake pad. Don't worry anymore about if you have the right brake pads for the wheels. Wheels have been testing in a lab environment on a dyno machine, and personally in the mountains of South Carolina on hot summer days. The real world testing of the resin capabilities comes in the form of slow speed descending on Greenville's Paris Mountain. On a 35C degree day, we are going to the very top of Paris Mountain and riding just the front brake the entire way down the mountain. It ends up taking about 7.5 minutes to get to the bottom, all while dragging the front brake. It's the true test of braking way beyond what anybody would do while riding. . . .and we do it again, and again.
PRIME ROAD HUBS
In part of making a complete wheel system, we wanted to have the highest quality hubs come standard on the wheels. We have a CNC factory produce the hubs for us to our specification to ensure you will have the stiffest, most stable, and best engaging hubs on the market.
Hubs can be one of the best ways to increase the stiffness of the wheels. If you think of a wheel as a triangle instead of a circle, the spokes have a base at the hub and come to a point at the rim. By increasing the base of this triangle you are making for a sturdier object, which translates directly to a stiffer wheel. Our hubs have some of the widest flange spacing on the market, which combined with the strength of the rims, help to make for an incredibly well responding and stiff wheelset.
Hub stability is something that is often overlooked, but is felt immediately when standing (such as when sprinting or climbing). To accomplish higher stability the bearings were also moved out as far as possible on the axle. Many hubs have a long end cap on the non-drive side with the bearing quite far from the edge of the hub. By supporting the non-drive side bearing and moving it out to the edge of the axle, the wheel stability is greatly increased.
SPOKES & NIPPLES
We feature Sapim CX Ray spokes and Sapim brass nipples on all carbon builds. Spokes are laced radially on the front and double crossed on both sides of the rear wheel for a stronger build and much better transfer of torque. All spokes and nipples are black.
How to read a wind tunnel graph (link coming)
We offer two spoke counts on all of our wheel sets. This is because not everybody has the same demands in a wheel set and to say that one wheel build will work for everybody just isn’t true. A 120 pound female triathlete is going to have much different demands in a wheel compared to a 200 pound masters crit racer who wants to use the wheels for everyday training and racing. So we offer the builds in options that will maximize both durability and performance. Going with the higher spoke count only adds about 40 grams to the weight of the wheels (less than half the weight of an empty water bottle), but will make for stronger, stiffer, and more durable wheels. If you are a larger, more powerful rider, and planning on using the wheels for years to come, you will want that added durability.
*Weight limit - 220 pounds 20/24 - 250 pounds 24/28
*Spoke count recommendation - under 180 pounds 20/24 - 180 pounds and over 24/28
*You do not need valve extenders if you are using an inner tube with a 80mm or longer valve.
Posted by Unknown on 9th Aug 2016
I ordered a set of the new 60mm clinchers after my old wheelset suffered a swift death. In my opinion there are pros and cons to the 60mm's but the customer service of Boyd and his team combined with the unbeatable value make for an excellent product.
Rider type: Amateur road racer who primarily races criteriums and rolling road races.
I've been on my new Boyd's for about 3 weeks and here is my impression
- Amazing in corners, my favorite part of the wheelset
- Aero profile
- Great breaking performance
- Incredibly stiff
- Value (half the price of similar offerings)
- Unbeatable customer service/crash replacement/warranty
- Look great on the bike (Totally subjective, I know)
- Slightly heavier than other offerings on the market (Disclaimer: I opted for the higher spoke count and we're talking grams here)
In summary, buy 'em.
All prices are in USD.